From electric cables, NOFIRNO® sealing systems, and multi cable transit solutions to valves, pipes, fittings, steel bars, sheets, and cable tray management systems, we provide comprehensive supply solutions for offshore, marine, oil & gas, and industrial projects—ensuring the right products, the right quality, and on-time delivery.
Multi-core CVV control cable and flexible CY / YY / LiYCY control cable — unshielded, shielded, armoured, low-smoke and screened variants for machinery, panels, instrumentation and control circuits.
0.6/1kV multi-core control cable, concentric stranded copper conductor, 2–30 cores, 0.5–6mm² cross-section, PVC insulation & sheath.
0.6/1kV multi-core control cable with annealed copper tape shield for EMI protection, 2–15 cores, 0.5–6mm² conductor.
0.6/1kV multi-core control cable with galvanized steel wire armour, 2–30 cores, 0.5–6mm² conductor — for direct burial and submerged installation.
300/500V screened flexible control cable, Class 5 flexible plain copper conductor, PET separator, tinned copper wire braid screen, PVC sheath.
Screened flexible control cable with low smoke zero halogen (LSZH) sheath — 300/500V, Class 5 flexible copper, tinned copper braid screen.
300/500V unscreened flexible PVC control cable, Class 5 flexible plain copper conductor, grey PVC sheath.
Unscreened flexible control cable with low smoke halogen-free sheath — 300/500V, Class 5 flexible plain copper conductor.
250/250V fine-stranded bare copper signal/data cable, PVC insulation, tinned copper wire braid screen, grey PVC outer sheath.
Twisted-pair variant of LiYCY for signal/data pairs — fine-stranded copper conductor, plastic foil separator, TCWB screen, grey PVC sheath.
Cable lugs, ferrules and crimping tools for terminating and joining copper conductors — tested to CSA and ANSI/UL wire connector standards, sized from small instrumentation cores up to heavy power cable.
Heavy-duty tin-plated copper cable lug to IEC 61238-1, sizes 2.5–630mm².
Three-hole (UCAT series) copper U-lugs for heavy power cable termination, M12 stud.
Colour-coded insulated ferrules, AWG 24 (0.25mm²) to 250MCM (150mm²).
DIN-profile insulated ferrules, AWG 20 (0.50mm²) to AWG 1 (50mm²).
Bare copper ferrules, AWG 20 (0.50mm²) to 500MCM (240mm²).
Ferrules for terminating two conductors in a single sleeve, 2×AWG20 (2×0.5mm²) to 2×AWG6 (2×16mm²).
Perforated, ladder and trough-type cable tray, with a full range of tees, bends, crosses and reducer fittings for structured cable routing on offshore platforms, FPSOs and industrial plants.
Perforated, ladder and trough-type tray in galvanized or stainless steel, for structured routing of power, control and instrumentation cables.
Full range of tray fittings, splice connectors and cover accessories for tray runs, turns, branch connections and reductions.
Every piece needed to route, join, cover and terminate a tray run:
Fire-stop sealant and multi-cable conduit filler sleeves, used together to seal cable and pipe penetrations through bulkheads, decks and conduit openings on offshore and marine installations.
Single-component silicone fire-stopping sealant for multi-cable and pipe transits through bulkheads and decks.
Non-split filler sleeves that seal multiple small cables through a single conduit or frame opening, used alongside NOFIRNO sealant.
6 sleeve families, each supplied non-split across a range of standard lengths:
All sleeves supplied non-split. Operating temperature -50°C to +180°C.
Copper-nickel 90/10 & 70/30 piping products for marine and offshore service. Cu-Ni is prized for its excellent seawater & biofouling resistance, good stress-corrosion & cavitation-erosion resistance, thermal stability to ~300°C, and good weld/solder properties.
Sizes 1/8" (10mm) to 36" (914mm) OD, seamless & seam welded, wall thickness rated to 10, 14, 16 & 20 bar service pressure.
Grades UNS C70600 (90/10) & C71500 (70/30). Width 1000–2000mm, length 2000–6000mm, thickness 0.1–100mm.
90°/45° elbows, equal & reducing tees, concentric & eccentric reducers, caps, saddles, and weldolets/sockolets/threadolets.
Couplings, elbows, tees, plugs, hexagonal nipples, union connectors, weldolets/sockolets/threadolets & sprinkler bush.
Solid & composite weld neck, slip-on and blind flanges in DIN, ANSI, EEMUA & ISO configurations.
Round bars 6–120mm, square bars 10–200mm, length up to 3660mm. Black, bright polished, rough turned, No.4, matt & BA finishes.
Standard sizes are stocked ex-works; non-standard sizes are produced to order. Full technical data sheets — wall thickness tables and chemical composition by standard — are available on request.
Complete range of Stainless Steel (SS304 / SS316) and Hot Dip Galvanized (HDG) bolts for structural, offshore, marine and industrial applications.
Industrial fastening nuts available in stainless steel and galvanized finishes for demanding environments.
High-quality washers designed to improve load distribution and fastening performance.
Material Grades: SS Bolts & Nuts – SS304 / SS316 | HDG Bolts & Nuts – IS 1367 / ASTM A325 / A307.
Sizes: M6 to M36 standard. Other sizes are available on request.
RA Energy Group supplies a comprehensive range of industrial products through our own operations and a trusted network of global manufacturers and suppliers. We are committed to delivering the right products, assured quality, competitive pricing, and on-time delivery for every project.
Contact the appropriate RA Energy Group entity — RA Energy Solutions Pte Ltd in Singapore or RA Services Sdn Bhd in Johor — for pricing, technical datasheets, or customized quotations for offshore, marine, oil & gas, and industrial projects.
For quotations, technical datasheets, or custom specifications on any product in our catalogue, reach out to the RA Energy Solutions team directly.
